at | Category: Wood Finishing



Wood floor repairs

From time to time your wooden floor will need repairing, either to remove scratches or stains or even to correct a floor that was badly laid in the first place. Scratches can be sanded away using fine to medium sand paper but it is recommended that any stained floorboards be replaced because, depending how deeply the stain has entered the wood, you may have to sand quite hard to get the stain out and this could mean that section of flooring will not look the same as the rest.

If you are fortunate enough to inherit an original wood floor or are looking to restore a floor you covered years ago with carpet, you may need to carry out some repairs. This may involve replacing sections of the old wood floor with new wood. Should you need to do this, it is advisable to source wood that, as closely as possible, matches the original wood, in colour and type.

Once the repairs have been carried out, the floor should be machine sanded to a fine finish and any gaps filled. With this done you can set about staining the floor to your chosen colour. Sometimes, stains in your flooring will only become apparent after the floor is machine sanded or even after applying the new chosen finish. If this happens, you may choose to replace that section or leave it because it adds character to your floor.

Original parquet floors were glued and pinned using copper headed pins. Over the years, these eroded leaving staining around each fixing. Unfortunately these stains cannot be removed, but it must be said, they form part of the floors character. When installing new parquet flooring, stainless steel headless pins are used to prevent this problem from occurring in the future.

Why it is important to hire a professional?

With the ever increasing number of DIY shows on television, a lot of people are attempting to restore their own wood floors only to find it’s not as easy as it looks on telly. Professional wooden floor restoration companies in Jacksonville will have invested in the right machinery for the job and also in the right training.

Having no experience and using machines which are not forgiving can cause extreme damage to your wood floor and can reduce its life by as much as 50% so it is important to employ a company whose employees are fully trained and qualified in wood floor restoration. This will ensure that the smallest amount of wood is removed during the sanding process and will therefore extend the life of your floor.

Hiring a professional to do the job will leave you with the perfect finish and may even end up saving you money, after all it would be a lot more expensive to attempt the job yourself, hire the machines, buy the sand paper and finishing materials, only to then have to hire in the Jacksonville professionals to redo the job afterward because you are unhappy with the finish.

Article Source: http://EzineArticles.com/6122367

If you are looking for a Jacksonville remodeling contractor then please call 904-757-9641 or complete our online request form.


©2011 Atlantic Total Solutions, All Rights Reserved